Veken Bidet Attachment for Toilet – Ultra-Slim Self Cleaning Fresh Cold Water Sprayer Bidets for Existing Toilets Seat Baday Beday Badette Bedette with Dual Nozzle for Feminine and Posterior Wash

BEFORE PURCHASING: I used the handy measurement graphic on the item description to ensure it fit my toilet and seat – it did. I highly suggest you do, too.IMPORTANT NOTE: I always read reviews prior to any purchase and did so with this bidet as well. I typically read a couple dozen and call it good. I didn’t happen to notice the particular “issue” I encountered, so here it is: The item photos suggest that the spray nozzles themselves are always visible, so imagine my disappointment when I unpacked the pieces only to see…………no nozzles on the bidet, just two posts where they should be! For a couple minutes I thought I had surely received a factory defective unit. After a few minutes of head scratching I assumed that they would release and extend once the water was turned on and they were pressurized by hitting one of the “on” buttons. I unexpectedly verified this after getting everything connected, turning the water back on, and hitting the “on” butt button…………..with my face squarely in front of the not-yet-extended nozzles. SURPRISE! The wife got a big kick out my dripping face. STORY MORAL: don’t despair – the nozzles are there.I’m not quite certain why anyone would have difficulty getting this bidet connected. The item description gives clear measurement instructions to ensure proper fitment; instructions in the box are certainly clear enough and don’t entail a large number of steps; the parts were all there, the T-connector is steel, no plastic parts – no problem. I got it all connected in about 15 minutes and we were off to the races with NO LEAKS.HELPFUL HINT FROM A NON-PLUMBER: I used one, single wrap of teflon plumber’s tape on each fitting that had an exposed thread (the fitting off the bottom of the toilet’s water closet, one of the fittings on the T-connector, and the one on the body of the bidet itself that the water line connects to). Remember to always wrap in a clockwise direction while looking directly at the hole of the fitting! The nut fitting will screw in that direction and will appropriately seat the teflon tape as it will “ride” along in the direction of the nut being screwed over the taped fitting. If you put the tape on backwards, screwing on the fitting will unseat it and push the tape backward, compromising the tightness of the connection and leaving room for leaks.I just installed this yesterday, so I don’t have a lot of usage to report on yet. What I can say is that once extended, the nozzles seem to be aimed perfectly based on their positioning at the very center of the toilet bowl’s back edge. Make sure to line them up this way! We did dial the pressure way back to about 3 on the dial at Wifey’s request. For the money, it’s a quality piece, installed quickly and easily, and seems to do the job. I can’t yet comment on the self-cleaning function, but will assume it won’t have any issues. We are on well water with heavy iron and a fair amount of hardness in our water, so I expect we may need to replace this in several years, but for the cost of this bidet attachment, I’m almost tempted to buy a replacement NOW so all I’ll need to do is just swap out the actual bidet body and won’t need to disconnect/re-connect everything (other than the water line to the bidet).If you’re in the market for a bidet attachment, it’s worth giving this one a try. Though it’s our first bidet, I’m confident saying that this one is a pretty safe bet for the relatively low cost involved. If it’s YOUR first run at a bidet attachment, I doubt it gets any simpler than this.

Hello my fellow poopers! I wanted to wait and try this out for a bit so I had a sturdy base in which to write my review. I bought this product back on July 15th and installed it a few days later. All you need is a pair of channel locks or a crescent wrench and a screw driver. Basic tools, easy to install. Had it installed in under 15 minutes. The hoses it comes with are amazingly high quality and perfect length and fit for my toilets (I ordered 2). Had one in the chamber and ready to test drive my new purchase immediately after install. It’s a little startling at first when the cold spray hits your rusty sherriff’s badge, but its refreshing and leaves you feeling clean. I especially find it most handy after I’ve went and ate a plate of super hot food… it instantly cools the ole burning ring of fire! The pressure on this bad boy is impressive as well. It has a nice gentle cleaning, all the way up to water chiseling the left over brown crayon still stuck partially in the box! If this thing had temperature control and a air dryer, it would be absolutely amazing! But hell, for $30, you cant beat this entry level bidet. Stability, pressure, cleanliness, and easy to clean… it’s a win win for the price!

Very easy to install and use. This is so much better than using TP. We now use only a few sheets of TP to dry off. As a bonus, the low flow toilet never gets clogged anymore. Also, when small children visit it’s easy to remove and place behind the tank so as not to worry about it being broken, misused and/or not turned off. Now that I’ve used this one, it’s hard to believe no one I know has one. And the temperature of the water is fine. We haven’t given it a second thought. Great product, unbelievable price.

I’ve known about bidets for a long time. After all, what’s funnier to a small American child than a water jet that comes out of your toilet? As I got older, the mere idea of a bidet was unthinkable. It sounds French, and it’s what stuck up people like.Well it turns out, if you’re not a huge fan of spending money on toilet paper or forget to grab a new roll, it’s for you too! Set-up is pretty straightforward, especially if you’re no stranger to tools (but even if you’re not, it’s pretty simple).Using it is even easier. Set the dial to the pressure setting you want (1 is a light trickle, 10 is pressure washer), push the button corresponding to your intended use, and then push the off button when you feel the job is done. I still use toilet paper to dry myself, but nowhere near as much as I used to before.The only downside is, and this isn’t the bidet’s fault, that when you use it, the water temp is whatever the temp of the water main is, which is probably icy cold. It takes some getting used to, and I’m sure there’s probably a product you can use to warm up the water between the wall fixture and the bidet if you feel strongly about it. Other than that, this is an awesome product, and it’s cheap enough that it’s worth at least trying!

Gets the job done strong enough to leave you feeling clean but not so strong that it feels like your being sandblasted it has a angle adjustment to make sure it hits where you need it to everyone is different so this let’s you get a more accurate shot and it has dual nozzles for your bum and for female wash not gonna lie I still like my luxe neo 180 or 185 don’t remember the exact model but it’s slightly better due having slightly better pressure but the controls on this one are far better just not sure how durable the buttons will be compared to the turn dials but it seems to be very well built came with everything except that white tape you need to put around the connector to prevent them from leaking installation was super easy maybe 10 mins tops and now I have bidets in every restroom in my house….. once I started using one a few years ago any time i gotta feed the sharks in a restroom without one just feels gross unsanitary and uncivilized cant believe i went more then half my life with out one never again this is definitely one thing the rest of the world does better then the us